A-A-51132A
3. Sockets length. Unless otherwise specified (see ordering data), the length of the socket to be furnished shall be selected from table I. The tolerance shall be ±1/16 inch.
Table I. Socket length.
|
Socket length 1/ (B) |
Length designation |
Socket length 1/ (B) |
Length designation |
|
2-3/8 |
01 |
7 |
09 |
|
2-15/16 |
02 |
7-1/4 |
10 |
|
3-19/32 |
03 |
8-1/2 |
11 |
|
|
|
|
|
|
4 |
04 |
9 |
12 |
|
4-1/2 |
05 |
9-1/2 |
13 |
|
5-3/4 |
06 |
10 |
14 |
|
|
|
|
|
|
6-1/4 |
07 |
10-1/8 |
15 |
|
6-3/4 |
08 |
11 |
16 |
1/ All dimensions are in inches
2/ The length designation is for use in developing the CID based part identification number only (see notes).
4. Socket diameter. Unless otherwise specified (see ordering data), the diameter of the socket to be furnished shall be selected from Table II. The tolerance of the diameter shall be =0.001 and -0.000 inches.
Table II. Socket diameter.
|
Socket diameter 1/ |
Diameter designation (A) |
Socket diameter 1/ |
Diameter designation (A) |
|
0.999 |
1 |
2.249 |
6 |
|
1.249 |
2 |
2.449 |
7 |
|
1.499 |
3 |
3.249 |
8 |
|
|
|
|
|
|
1.749 |
4 |
3.499 |
9 |
|
1.999 |
5 |
|
|
1/ All dimensions are in inches
2
5. Internal Taper. Unless otherwise specified (see ordering data), the number of the internal taper shall selected from table III.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business