A-A-55017A
5. PRODUCT CONFORMANCE.
5.1 Product conformance. The products provided shall meet the salient characteristics of this
commercial item description, conform to the producer's own drawings, specifications, standards,
and quality assurance practices, and be the same product offered for sale in the commercial
market. The government reserves the right to require proof of such conformance.
5.2 Market acceptability. The product offered must have been previously sold either to the
government or on the commercial market.
6. PACKAGING.
6.1 Preservation, packing, and marking. For acquisition purposes, the products shall be
preserved, packed, and marked as specified in the acquisition order (see 7.1).
7. NOTES.
7.1 Ordering data. The contract or order should specify the following:
a. CID document number, revision, and CID PIN.
b. Size and quantity required.
c. Packaging requirements (see 6.1)
7.2 Part or identification number (PIN). The following part or identification numbering procedure is
for government purposes and does not constitute a requirement for the contractor.
AA55017 XX
Size (see Table I)
CID number
7.3 Sources of documents.
7.3.1 FAR. The FAR may be obtained from the Superintendent of Documents, U.S. Government
Printing Office, Washington, DC 20402-0001 or online at https://www.arnet.gov.far .
7.3.2 ASME standards. Copies of ASME standards may be obtained from the ASME
International, Three Park Avenue, M/S 10E, New York, NY 10016-5990.
7.3.3 ASTM standards. Copies of ASTM standards may be obtained from ASTM International, 100
Barr Harbor Drive, Conshohocken, PA 19428-2959 or online at www.astm.org .
7.4 Key words.
Arbor
Cylindrical
Taper
7.5 Changes from previous issue. Marginal notations are not used in this revision to identify
changes with respect to the previous issue due to the extent of the changes.
3