A-A-51133A
TABLE II. Sampling plan.
|
Quantity of items being purchased |
Sample size |
Quantity of items being purchased |
Sample size |
|
2 to 8 |
2 |
91 to 150 |
20 |
|
9 to 15 |
3 |
151 to 280 |
32 |
|
16 to 25 |
5 |
281 to 500 |
50 |
|
26 to 50 |
8 |
501 to 1200 |
80 |
|
51 to 90 |
13 |
|
|
4.3 Examination. Each holder submitted for sample inspection shall be visually examined to determine conformance with all requirements of this description except the hardness tests.
4.4 Dimensional inspection. Each holder submitted for sample inspection shall be inspected to assure conformance with all dimensional and tolerance requirements specified herein.
4.5 Hardness test. After the sample inspection has been completed, a hardness test shall be performed on 10 percent of the sample holders body. If any of the test samples fail to meet the applicable hardness specified herein, the total lot from which the samples were selected shall be rejected.
4.6 Packaging inspection. Packaging shall be inspected for conformance with section 5.
5. PACKAGING
5.1 Preservation, packing, and marking. Unless otherwise specified in the contract or purchase order preservation, packing, and marking shall be in accordance with ASTM D 3951. When specified (see 6.1) preservation, packing, and marking shall be in accordance with PPP-P-40, level as specified.
6. NOTES
6.1 Ordering data. Purchasers should select the preferred options permitted herein, and include the following information in procurement documents:
a. Title, number, and date of this commercial item description.
b. Size and quantity required (see 1.2).
c. Packaging in accordance with PPP-P-40 if required, specify level required (see 5.1).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business