A-A-55011
November 19, 1991
COMMERCIAL ITEM DESCRIPTION
WHEEL, POLISHING, FELT
The General Services Administration has authorized the use of this
commercial item description in preference to GGG-W-301B, type V.
ABSTRACT
1.
1.1 Abstract. This description covers a felt polishing wheel which is
normally used for metal and plastic finishing operations.
2.
CLASSIFICATION
2.1 Classification. The polishing wheel shall be of one
type. The
diameter, face width, arbor hole diamter, density, and quantity shall be as
specified (see 7.1).
3.
SALIENT
CHARACTERISTICS.
3.1 Design. The polishing wheel shall be of the square face type and shall
be equal to wheels sold to the commercial market. The square face type is
defined as a wheel which has the face perpendicular to the sides.
3.2 Material.
The polishing wheel shall be manufactured from 100 percent
wool felt The felt shall be free from imperfections and contamination that
may affect appearance or serviceability.
3.3 Diameter. The diamrter of the polishing wheel to be furnished shall be
as specified 7.1), and shall be selected from the following diameters.
6 inch, 8 inch, 10 inch, 12 inch, 14 inch, 16 inch
3.4 Face width. The face width of the polishing wheel to be furnished
shall be as specified (see 7.1), and shall be selected from the following
widths.
1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, 1 inch, 1-1/4 inch
FSC 3460
AMSC N/A
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business